NEC MultiSync P401 User Manual

Also see for MultiSync P521: Specifications Installation and assembly User manual Specifications Specifications

NEC MultiSync P401 User Manual Manual pdf 10 page image

English-8Terminal PanelOutInR G B H VRGB/HV R G B H VDVD/HD2 Pr Y PbVIDEO2 VIDEOVIDEO IN connector (BNC and RCA)To input a composite video signal. BNC and RCA connectorsare not available at the same time (Use only one input).VIDEO OUT connector (BNC)To output the composite video signal from the VIDEO INconnector.DVD/HD connector (RCA)Connecting equipment such as a DVD player, HDTV device,or Set-Top-Box.S-VIDEO IN connector (Mini DIN 4 pin)To input the S-video (Y/C separate signal).AUDIO IN 1, 2, 3To input audio signal from external equipment such as acomputer, VCR or DVD player.AUDIO OUTTo output the audio signal from the AUDIO IN 1, 2, 3,DPORT, HDMI, and TV jack to an external device(stereo receiver, amplifier, etc.).EXTERNAL CONTROL (D-Sub 9 pin)IN connector: Connect RS-232C input from externalequipment such as a PC in order to control RS-232Cfunctions.OUT connector: Connect RS-232C output. To connectmultiple MultiSync monitors via RS-232C daisy Chain.LAN port (RJ-45)LAN connection. See page 31.REMOTE IN/OUTUse the optional wired remote control by connecting it toyour monitor.NOTE: When you use Remote IN/OUT, IR CONTROL inOSD menu should be NORMAL.Main Power SwitchOn/Off switch to turn main power ON/OFF.AC IN connectorConnects with the supplied power cord.DISPLAYPORT connectorTo input DisplayPort signals.HDMI connectorTo input digital HDMI signals.DVI IN (DVI-D)To input digital RGB signals from a computer or HDTVdevice having a digital RGB output.* This connector does not support analog input.VGA IN (mini D-Sub 15 pin)To input analog RGB signals from a personal computer orfrom other RGB equipment.RGB/HV IN [R, G, B, H, V] (BNC)To input analog RGB signals or signals from other RGBequipment.This is also to connect equipment such as a DVD player,HDTV device and Set-Top-Box. A Sync-on-Green signal canbe connected to the G connector.This input can be used with an RGB, DVD/HD or Videosource. Please select signal type in TERMINAL SETTING.RGB/HV OUT (BNC)To output the signal from the RGB/HV IN connector orVGA IN connector which is on screen to an input on aseparate device. If both signals are not on screen, outputsthe signal from RGB/HV IN connector.RLOutInL (OUT)R (OUT)R, Cr/Pr(OUT)G, Y, VIDEO(OUT)B, Cb/Pb(OUT)H(OUT)V(OUT) Y Cb/PbL/R(IN1)L(IN2)L(IN3)R, Cr/Pr(IN)G, Y, VIDEO(IN)B, Cb/Pb(IN)H(IN)V(IN)Cr/Pr R(IN2)R(IN3)