NEC MultiSync P401 User Manual

Also see for MultiSync P521: Specifications Installation and assembly User manual Specifications Specifications

NEC MultiSync P401 User Manual Manual pdf 22 page image

English-20Setting DefaultBRIGHTNESS Adjusts the overall image and background brightness. Press + or - to adjust. 70Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot be changed.CONTRAST Adjusts the image brightness in relationship to the background. Press + or - to adjust. 50Note: When sRGB is selected in picture mode, this function cannot be changed.SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50* 2BLACK LEVEL Adjusts the image brightness in relationship to the background. Press + or - to adjust. 50Note: When sRGB is selected in picture mode, this function cannot be changed.TINT Adjusts the tint of the screen. Press + or - to adjust. 50Note: When sRGB is selected in picture mode, this function cannot be changed.COLOR Adjusts the color depth of the screen. Press + or - to adjust. 50* 2Note: When sRGB is selected in picture mode, this function cannot be changed.COLOR TEMPERATURE Adjusts the color temperature of the entire screen. A low color temperature will make the screen 10000Kreddish. A high color temperature will make the screen bluish. If TEMPERATURE needs furtheradjustment, the individual R/G/B/ levels of the white point can be adjusted. To adjust theR/G/B levels, CUSTOM must be showing as the COLOR TEMP selection.Note: When sRGB is selected in picture mode, predefined 6500k is set so it cannot be changed.When PROGRAMMABLE is selected in GAMMA SELECTION, this function cannot be changed.COLOR CONTROL Adjusts the hue of the Red, Yellow, Green, Cyan, Blue, Magenta and Saturation. 0Note: When sRGB is selected in picture mode, this function cannot be changed.GAMMA SELECTION Select a display gamma for best picture quality. NATIVE* 2Note: When sRGB is selected in picture mode, this function cannot be changed. (except sRGBNATIVE Gamma correction is handled by the LCD panel.2.2 Typical display gamma for use with a PC.2.4 Good for video (TV, DVD, etc.)S GAMMA Special gamma for certain types of movies. Raises the dark parts and lowers the light partsof the image (S-Curve).DICOM SIM. DICOM GSDF curve simulated for LCD type.PROGRAMMABLE A programmable gamma curve can be loaded using NEC optional software.MOVIE SETTINGSNOISE REDUCTION Adjusts the amount of noise reduction. Press + or - to adjust. 6* 2TV, VIDEO1, VIDEO2, S-VIDEO inputs onlyFILM MODE Automatically senses the sources frame rate for optimal picture quality. AUTO* 2HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs onlyADAPTIVE CONTRAST Sets the level of adjustment for dynamic contrast. OFFHDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV* inputs onlyPICTURE MODE Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [AMBIENT1] or STANDARD[AMBIENT2]. See page 18.PICTURE RESET Resets the following settings within the PICTURE menu back to factory setting: -BRIGHTNESS, CONTRAST, SHARPNESS, BLACK LEVEL, TINT, COLOR, COLORTEMPERATURE, COLOR CONTROL , GAMMA SELECTION, MOVIE SETTINGS.AUTO SETUP Automatically adjusts Screen Size, H position, V position, Clock, Clock Phase and White Level. -VGA, RGB/HV inputs onlyAUTO ADJUST H Position, V Position and Clock Phase are adjusted automatically upon power on. OFFVGA, RGB/HV inputs onlyH POSITION Controls the horizontal position of the image within the Display area of the LCD. -All inputs except DVI, HDMI, DPORT Press + to move right. Press - to move left.V POSITION Controls the vertical position of the image within the Display area of the LCD. -All inputs except DVI, HDMI, DPORT Press + to move up. Press - to move down.CLOCK Press + to expand the width of the image on the right of the screen. -VGA, RGB/HV inputs only Press - to narrow the width of the image on the left.CLOCK PHASE Adjusts the visual “noise” on the image. -VGA, RGB/HV, DVD/HD1, DVD/HD2, SCART inputs only*: The product you purchased may not have this feature. *2: depends on signal inputPICTUREADJUSTsetting)