NEC MultiSync P401 User Manual

Also see for MultiSync P521: Specifications Installation and assembly User manual Specifications Specifications

NEC MultiSync P401 User Manual Manual pdf 25 page image

English-23EnglishINFORMATION OSD Selects whether the information OSD is displayed or not. The information OSD will be ON, 3 Sec.displayed when the input signal or source changes. The information OSD will also give awarning when there is no-signal or the signal is out-of range.An interval between 3 to 10 seconds for the Information OSD to appear is available.MONITOR INFORMATION Monitor Information. -CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbonfootprint factor in the carbon saving calculation is based on the OECD (2008 Edition).OSD TRANSPARENCY Set the transparency level of the OSD. TYPE2OFFTYPE1TYPE2OSD ROTATION Determines the OSD display direction between landscape and portrait. LANDSCAPELANDSCAPE Display the OSD with landscape mode.PORTRAIT Display the OSD with portrait mode.INPUT NAME You can create a name for the INPUT currently being used. -Max: 8 characters, including Space, A-Z, 0-9, and some symbols.CLOSED CAPTION Activates closed captioning. OFFVIDEO1, VIDEO2, S-VIDEO inputs onlyOSD RESET Resets the following settings within the OSD menu back to factory setting: -OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY,CLOSED CAPTION.MONITOR ID Sets the monitor ID number from 1-100 and group ID from A-J. 1NOTE: Group ID is made of multiple selections.IR CONTROL Selects the mode of the monitor for use with the infra-red remote control when using the NORMALRS-232C daisy chain.NORMAL The monitor will be controlled normally using the remote controller.PRIMARY Choose “PRIMARY” for the first monitor within an RS-232C daisy chain.SECONDARY Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.LOCK Prevents the monitor from being controlled by the wireless remote controller. To return tonormal operation, press the “DISPLAY” button on the remote controller for 5 seconds.TILE MATRIX Allows one image to be expanded and displayed over multiple screens (up to 100) through adistribution amplifier.NOTE: Low resolution is not suitable for tiling to a large number of monitors. You can operatewithout a distribution amplifier at a lower number of screens.H MONITORS Number of monitors arranged horizontally. 1V MONITORS Number of monitors arranged vertically. 1POSITION Select which section of the tiled image to be displayed on the monitor. 1TILE COMP Turns the TILE COMP feature on. NOENABLE Enables Tile Matrix. NOPOWER ON DELAY Adjusts the delay time between being in “standby” mode and entering “power on” mode. 0 Sec.“POWER ON DELAY” can be set between 0 and 50 seconds.POWER INDICATOR Turns ON or OFF the LED located at the front of the monitor. ONIf “OFF” is selected, LED will not light when the LCD monitor is in active mode.EXTERNAL CONTROLCONTROL Selects the control interface, RS-232C or LAN. RS-232CLAN RESET Resets the LAN settings. -ID=ALL REPLY When controlling the monitor externally, select if the communication command, which specifies ONdestination equipment ID (ALL or GROUP ID), is replying or not. Use this function as necessary,if you connect the multiple monitors that are daisy-chained from secondly monitor by RS-232C.MAC ADDRESS Displays the MAC ADDRESS. -MULTI DISPLAY