NEC MultiSync P403 User Manual

Also see for P703: Specification Manual Specification Specifications Installation guide

Contents

NEC MultiSync P403 User Manual Manual pdf 38 page image

English-36Network SettingClick “NETWORK” on the left side of HOME.IP SETTING Set for IP ADDRESS setting.AUTO: Automatically assign an IP address.MANUAL: Set your IP address of the network connected to the monitor.NOTE: Consult your network administrator for the IP address when [AUTO] is selected for[IP SETTING].IP ADDRESS Set your IP address of the network connected to the monitor when [MANUAL] is selected for[IP SETTING].SUBNET MASK Set your subnet mask number of the network connected to the monitor when [MANUAL] is selectedfor [IP SETTING].DEFAULT GATEWAY Set your default gateway of the network connected to the monitor when [MANUAL] is selected for[IP SETTING].NOTE: Set as [0.0.0.0] to delete the setting.DNS Set for IP ADDRESS setting of DNS server.AUTO: Automatically assign an IP address of DNS server connected to the monitor.MANUAL: Set your IP address of DNS server connected to the monitor.PRIMARY DNS Set your primary DNS settings of the network connected to the monitor.NOTE: Set as [0.0.0.0] to delete the setting.SECONDARY DNS Set your secondary DNS settings of the network connected to the monitor.NOTE: Set as [0.0.0.0] to delete the setting.NOTE: The following settings will reset back to the factory setting when “IP ADDRESS RESET” is selected by an EXTERNALCONTROL of OSD:[IP SETTING]: AUTO, [IP ADDRESS]: 192.168.0.10, [SUBNET MASK]: 255.255.255.0, [DNS]: AUTO [DEFAULTGATEWAY], [PRIMARY DNS] and [SECONDARY DNS] are blank.