NEC MultiSync PA231W User Manual

Also see for MultiSync PA231W: Specification User manual Specifications Specifications User manual

English-8Figure S.1100 mm100 mmFigure F.1Weight of LCD assembly: 7.0 kg (PA231W)7.4 kg (PA241W)9.6 kg (PA271W)12.5 kg (PA301W)Mount Flexible armThis LCD monitor is designed for use with a fl exible arm.1. Follow the instructions on how Remove Monitor Stand forMounting to remove the stand.2. Using the 4 screws from the stand removal and attach the arm tothe monitor (Figure F.1).Caution: Use ONLY the screws (4 pcs) that are included or thescrews M4 size (Length: thickness of bracket and washer +10-12 mm) when mounting to avoid damage to the monitorand stand. To fulfi l the safety requirements the monitormust be mounted to an arm which guaranties thenecessary stability under consideration of the weight ofthe monitor. The LCD monitor should only be used withan approved arm (e.g. GS mark).MountingBracketScrewWasherUnit10-12 mmThicknessof bracketand washerNOTE: Tighten all screws.(recommended Fasten Force: 98 - 137N•cm)*2 Only for PA271W/PA301W.200 mm*2Flexible Arm InstallationThis LCD monitor is designed for use with a fl exible arm.To prepare the monitor for alternate mounting purposes:NOTE: For PA301W, the monitor must be installed or moved by two or more people.• Follow the instructions provided by the manufacturer of the display mount.• To meet the safety requirements, the monitor must be mounted to an arm that supports the weight of the monitor.See pages 26-29 for details on each model. Remove the monitor stand before mounting.Remove Monitor Stand for MountingTo prepare the monitor for alternate mounting purposes:1. Disconnect all cables.2. Place hands on each side of the monitor and lift up to the highest position.3. Place monitor face down on a non-abrasive surface (Figure S.1).4. Place one hand around the base and one hand on the Quick Release Lever.Push and hold the Quick Release Lever in the direction indicated by the arrows(Figure S.1).5. Lift up the stand to unhook it from the monitor (Figure S.1).The monitor can now be mounted using an alternate method.Reverse process to reattach stand.NOTE: Handle with care when removing monitor stand.