NEC MultiSync PA231W User Manual

Also see for MultiSync PA231W: Specification User manual Specifications Specifications User manual

English-19EnglishB-SHARPNESS*1(Analog input only)Adjusts the sharpness of the blue component of the image.Press “LEFT” or “RIGHT” to adjust.DVI Long Cable(DVI input only)Compensates for image degradation caused by using a long DVI cable.There are 4 possible settings, with “0” being the lowest level of compensation and “3”being the highest level. The default setting is “1”.Tag4*1(Analoginput only)AUTO ADJUST* 2 Automatically adjusts the Image Position and H.Size settings and Fine settings.Press “SELECT” to activate Auto Adjustment. Please use test pattern, which is includedin the enclosed CD-ROM.SIGNAL ADJUST Determines when the auto adjustment is activated automatically.The choices are “SIMPLE” and “FULL”. Press “LEFT” or “RIGHT” to select.H-size, Fine, H/V Position ContrastSIMPLE O XFULL O OO: Automatic Adjustment X: No Automatic AdjustmentNOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.AUTO ADJUSTLEVELDetermines the automatic adjustment level for Auto Adjust. The choices are “SIMPLE”,“FULL” and “DETAIL”. Press “LEFT” or “RIGHT” to select. Refer to the below table.Size, Fine, Position Contrast Black Level TimeSIMPLE O X X 1 secondFULL O O X 1.5 secondsDETAIL* O O O 5 secondsO: Automatic Adjustment X: No Automatic Adjustment* “DETAIL” activates automatic long cable (skew, peaking) adjustment.A-NTAA SW The Advanced No Touch Auto Adjust function is able to recognize new signals evenwhen neither the resolution nor the refresh rate has changed. If several PCs areconnected to the monitor, and each transmit very similar (or even the same) signals interms of resolution and refresh rates, the monitor recognizes that there is a new signaland automatically optimizes the picture without the need for any action on the part of theuser.OFF: A-NTAA is disabled.ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimalsettings for the new signal. If no change in the signal is detected then A-NTAA does notactivate. The screen will be blank while the monitor optimizes the signal.OPTION: Functions the same as ON, except that the screen does not go blank when themonitor makes adjustments for changes in signal, allowing the monitor to display the newsignal faster. When using an external switching device to connect 2 or more PCs to themonitor, using the ON or OPTION settings is suitable.AUTO CONTRAST* 2 Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust.Any adjustment requires the image to have white portions.CONTRAST Adjusts the image brightness and contrast in relation to the background.Press “LEFT” or “RIGHT” to adjust.AUTO BLACK LEVEL*2 Automatically adjusts the black level. Any adjustment requires the image to have blackportions. Press “SELECT” to activate Auto Adjust.BLACK LEVEL Adjusts the RGB black level by input signal level.Tag5 H.POSITION Controls Horizontal Image Position within the display area of the LCD.Press “LEFT” or “RIGHT” to adjust.V.POSITION Controls Vertical Image Position within the display area of the LCD.Press “LEFT” or “RIGHT” to adjust.H.SIZE*1(Analog input only)Adjusts the horizontal size of the screen.If the “AUTO Adjust function” do not give you a satisfactory picture setting, a furthertuning can be performed using the “H.Size (V.Size)” function (dot clock). For this a Moirétest pattern could be used. This function may alter the width of the picture. Use LEFT/RIGHT Menu to center the image on the screen. If the H.Size (V.Size) is incorrectlycalibrated, vertical bands will appear. The image should be homogeneous.FINE*1(Analog input only)Improve focus, clarity and image stability by increasing or decreasing this setting.If the “Auto Adjust function” and the “H.Size” function do not give you a satisfactorypicture setting, a fi ne tuning can be performed using the “Fine” function. For this a Moirétest pattern could be used. If the Fine value is incorrectly calibrated, horizontal lines willappear on the display. The image should be homogeneous.*1 Only for PA231W/PA241W. *2 This item does not reset by FACTORY PRESET (Tag7).