NEC N223I Using Manual

Contents

Back side settings2nd-LCD informationThis 2nd-LCD screen displays condition of your phone, when the phone is closed. Clock, messages or icons are displayed on 2nd-LCD,depending on the settings.Back side settings☛ Press 5 and 6. The Back side setting screen will be displayed.(1) 2nd-LCD2The default setting is ON.ON: Enables clock, messages or icons to be displayed on 2nd-LCD.OFF: Disables clock, messages or icons to be displayed on 2nd-LCD. But, even if you select OFF, 2nd-LCD displays clock or messageswhile setting “Set clock type” or “Contrast”.(2) Fixed clockON: Displays only clock on 2nd-LCD.OFF: Displays clock and messages on 2nd-LCD.(3) Incoming call no.ON: Displays the telephone number or the name of the caller (if you have stored it in the phonebook), when you receive a call.OFF: Displays “Incoming”, irrespective of any information in your phone.(4) Set clock typeTo select the clock type (Digital or Analogue) or display direction (Original or Reverse), use the ▲ and ▼ keys to move the highlight, thenpress Softkey 1 to select one of them. To end the screen setting, press CLR or Softkey 2.• If you select “Digital”, you can set the display direction of clock only.• If you select “Analogue”, you can set the display direction of clock and messages.(5) ContrastTo adjust the contrast of 2nd-LCD, use the ▲ and ▼ keys. You can check that the contrast is changing on 2nd-LCD during setting. Thenpress Softkey 1 to select the current setting or CLR to cancel it.(6) LED colour2 When you set to ON, the currentsetting’s number will become green(Available for setting of (1) 2nd-LCD,(2) Fixed clock or (3)Incoming callno).2 You can toggle between on and offby pressing Softkey 1 (Available forsetting of (1) 2nd-LCD, (2) Fixedclock or (3)Incoming call no).2 The default setting is OFF.2 The default setting is ON.2 The default setting is “Digital”.