Connection numberThis option enables you to select which connection number you use (Factory setting 1 = Contractor, Factory setting 2 = Prepaid, User setting1) to connect to the e-moción service.☛ Press 2 and 2. The connection number options will be displayed with the number for the selected option displayed in green.☛ Use the ▲ and ▼ keys to select the required option and press Softkey 1.If you select User setting, you will be offered the options shown in the table right. Press the relevant key to select the required option,enter the required information and the press Softkey 1 to return to the User setting options.☛ Press Softkey 2 twice to return to the e-moción settings menu.☛ Press briefly to return to the standby screen.e-moción lockIf you choose to turn the e-moción lock on, you will not be able to connect to any e-moción services or send or receive mail.☛ Press 2 and 3 then press Softkey 1 to toggle the e-moción lock on or off. When the e-moción lock is on, a ✔ is displayed overthe menu icon and the e-moción lock icon ( ) is shown at the top of your phone’s standby screen.☛ Press briefly to return to the standby screen.2 The factory setting is fixed setting forconnecting to specific operator,while the user settings can bechanged.2 The connection with the numberdisplayed in green will be theconnection number used when youmake an e-moción connection.User setting option No.APN (Access point name) 1IP Address(Gateway address) 2Portal server(MoviStar e-moción menu server) 3Message server 4User data51 User name2 PasswordPort No. 61 HTTP Port No.