Configuring Your Server 4-37Menu Tree+: Selection/execution parameter : Setting parameter. •: Information display>: Can be set (modified) after creation of virtual driveMenu Description+Configure Performs Configuration settings+Easy Configuration Set configuration (Using fixed value)+New Configuration Set new configuration+View/Add Configuration Additional setting / viewing configuration+Clear Configuration Clear configuration+Select Boot Drive Chose Bootable Virtual Drive+Initialize Initialize virtual drive+Objects Various settings+Adapter Set disk array controller+Sel. Adapter Clear configurationRebuild Rate 30Chk Const Rate 30FGI Rate 30BGI Rate 30Disk WC OffRead Ahead OnBios State EnableCont on Error YesFast Init EnableAuto Rebuild OnAuto Resume EnableDisk Coercion 1GBFactory Default+Virtual Drive Virtual drive operation+Virtual Drives Select virtual drive (when multiple virtual drives exist)+Initialize Initialize virtual drive+Check Consistency Check virtual drive redundancy+View/Update Parameters Display virtual drive information• RAID Display RAID level• SIZE Display virtual drive capacity• Stripe SIZE Display stripe size• #Stripes Display the number of hard disk drives in virtual drive• State Display virtual drive status• Spans• Disk WC Off: Write throughOn: Write back• Read Ahead+Physical Drive Physical drive operation+Physical Drive Selection Menu Select physical drive+Make HotSpare Set as hot-spare disk for auto rebuilding+Force Online Make a disk online+Force Offline Make a disk offline+Drive Properties Display hard disk drive information• Device Type Hard disk drive type• Capacity Hard disk drive capacity• Product ID Hard disk drive model• Revision No. Hard disk drive revision+Rebuild Perform rebuilding+Check Consistency Perform virtual drive redundancy check
