x Fibre Channel Device go missingConfirm the followings if the Fibre Channel device which was in use and connected to this product isnot detected by the operating system or is inaccessible after rebooting Computer. Also, refer to theUser’s Guide that came with the Fibre Channel device, and other guides of applications you use.䖃Select [Administrative Tools] - [Computer Management] - [Device Manager], and confirm that youcan see the Fibre Channel device under [Disk Drive].- If you cannot see it, try either of the followings.(1) Select [Computer Management] - [Disk Management]. If you can see the drive letterassigned to the Fibre Channel device, close the Computer Management, and try to accessagain.(2) Reboot Computer if possible, and try to access again.䖃Is the Fibre Channel where this product is connected working properly?- Refer to the guides of your device, and confirm that it is working properly. If the Fibre Channel device is not detected even when all the above items areconfirmed. Please contact your retailer or service center for repair.x No response in UEFI menuConfirm the followings if no response in UEFI menu.䖃If select [Scan for Fibre Devices] and press .- Confirm the Fibre Channel devices are working properly and wait a minutes.䣐䣱䣶䣫䣥䣧
