NEC NEC-101T User Manual

Contents

NEC NEC-101T User Manual Manual pdf 21 page image

21Getting StartedInitial SettingsWhen the power is first turned on, the language selectingscreen appears.1 Tap the language, and then "Next".2 Tap "Next".The "Get started !!!" screen appears.3 Tap "Settings".4 Tap the item to set up.• "Date and Time"Set date and time. Also, you can select time zone,time / date display format. If you check the box of"Automatic", date and time settings areautomatically adjusted.Tap "Back" to complete "Date and Time" settings.• "Network"Set Wi-Fi settings. Check the box of "Wi-Fi" to turnon the Wi-Fi. A scan for Wi-Fi networks startsautomatically. Tap the name of the Wi-Fi networksthat you want to connect to.Tap "Back" to complete "Network" settings.• "Accounts"Tap "Corporate" or "Google" to set the account.Follow the screens.• "Email account"Enter your email address and the password to setthe account.5 Tap "Done" to complete initial settings.You can set these settings later. Tap ,"Settings", and then select the item to set (P.47).Access Point SettingsThe access points required for connecting to the Internetare preset. You may add or change them as required.1 From the Idle screen, tap ` "Settings" `"Wireless & networks" ` "Mobile networks" `"Access Point Names".2 Tap the radio button for the access point.Adding an access point1 From the Idle screen, tap ` "Settings" `"Wireless & networks" ` "Mobile networks" `"Access Point Names".2 Tap ` "New APN".3 Tap "Name" ` enter the name of the new networkprofile ` "OK".4 Tap "APN" ` enter the access point name ` "OK".5 Enter any other items requested by your networkoperator.6 Tap ` "Save".Note• Do not change "MCC" or "MNC". Otherwise, registered /added access points will no longer display on the screen. Ifaccess points no longer display due to the "MCC" and "MNC"settings being changed, you can either restore defaultsettings or manually set the access points again.Initializing an access pointWhen you initialize an access point, it returns to itsdefault settings.1 From the Idle screen, tap ` "Settings" `"Wireless & networks" ` "Mobile networks" `"Access Point Names".2 Tap ` "Reset to default".