NEC NEC-101T User Manual

Contents

NEC NEC-101T User Manual Manual pdf 22 page image

22Getting StartedWi-Fi SettingsWi-Fi is a function that allows you to use email and theInternet, via access points for household / corporatenetworks or public wireless LAN services.1 From the Idle screen, tap ` "Settings" `"Wireless & networks" ` "Wi-Fi settings".2 Check the box of "Wi-Fi".A scan for Wi-Fi networks begins automatically. A listof available networks appears.If your network does not appear, tap ` "Scan"to begin a scan again.3 Select the Wi-Fi network.4 Enter the password when requested.5 Tap "Connect".Connecting with Wi-Fi easy settingsWhen an access point-capable device supports "WPS",you can easily complete the required settings, includingESSID and the security method.1 From the Idle screen, tap ` "Settings" `"Wireless & networks" ` "Wi-Fi settings".2 Check the box of "Wi-Fi".3 Tap "Wi-Fi Easy Settings" ` "WPS".4 Tap "Push Button Control method" or "PINmethod".Push Button Control methodSearching for access points starts, so you should pressthe pushbutton on an access point itself or an accesspoint's setting screen. Follow the screen prompts.PIN methodSearching for access points starts. Follow the screenprompts. When PIN code (for WPS) appears, register thedisplayed number in the access point.Adding a Wi-Fi network manuallyFor information on using an access point, refer to themanual for the access point.1 From the Idle screen, tap ` "Settings" `"Wireless & networks" ` "Wi-Fi settings".2 Check the box of "Wi-Fi".3 Tap "Add Wi-Fi network".4 Enter "Network SSID" and the "Security" type.5 Enter additional security information as required.6 Tap "Save".Disconnecting a connected Wi-Finetwork1 From the Idle screen, tap ` "Settings" `"Wireless & networks" ` "Wi-Fi settings".2 Tap the box of "Wi-Fi" to clear the check mark.The password of the connected Wi-Fi network will bestored.To delete the password, tap the connected Wi-Finetwork ` "Forget" while the "Wi-Fi" is on.Optional settings for Wi-FiTurn on "Wi-Fi" beforehand.1 From the Idle screen, tap ` "Settings" `"Wireless & networks" ` "Wi-Fi settings".2 Tap ` an item.Change priorityTouch and hold the name of the network to changeswitching priority.AdvancedWi-Fi sleep policySet Wi-Fi to enter sleep if no keys are pressed for 15minutes after the screen dims. After entering sleep,Wi-Fi connection will be closed, but it will connect toan access point automatically. You can also set theWi-Fi function not to enter sleep at any time, orduring charging.Connection setup of Wi-FiMAC addressIP addressUse static IPSet whether to specify a static IP address forconnecting with a Wi-Fi network. To use a static IPaddress, "IP address", "Gateway", "Netmask", "DNS1", and "DNS 2" need to be set.