282. Projecting an Image (Basic Operation) Correcting Keystone DistortionWhen the projector is not exactly perpendicular to the screen, keystone distortion occurs. To overcome it, you can usethe “Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting in a crisp, squareimage.The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distor-tions.When the projector is placed diagonally to the screen,When the projector is set up at an angle in relation to the screen, adjust the Horizontal option of the Keystone menuso that the top and bottom of sides of the projected image are parallel.1. Press the 3D REFORM button on the remote control or the projec-tor cabinet.The Keystone screen will be displayed on the screen.2. Press the button to select [VERTICAL] and then use the or so that the left and right sides of the projected image are parallel.* Adjust the vertical keystone distortion.3. Align the left (or right) side of the screen with the left (or right) sideof the projected image.• Use the shorter side of the projected image as the base.• In the right example, use the left side as the base.4. Press the button to select [HORIZONTAL] and then use the or so that the top and bottom sides of the projected image are par-allel.• Adjust the horizontal keystone distortion.Screen frameProjected areaAlign left side
