29Adjusting the Tilt Foot1. Lift the front edge of the projector.CAUTION:2. Push up the Adjustable Tilt Foot Levers on the right and left sidesof the projector to extend the adjustable tilt feet (maximum height).3. Lower the front of the projector to the desired height.4. Release the Adjustable Tilt Foot lever to lock the Adjustable tilt foot.There is approximately 10 degrees (up) of adjustment for the front ofthe projector.Adjustable TiltFoot LeverAdjustable TiltFoot LeverNOTE: Your “Keystone” correction data can be reset by pressing and holdingthe 3D REFORM button for a minimum of 2 seconds.CAUTION:TIP: For operating the [KEYSTONE] screen, see “ Correcting Keystone Dis-tortion” on page 30.3. Projecting an Image (Basic Operation)2LAMPSTATUSPOWERSOURCEAUTO ADJUST3D REFORMON/STAND BYSELECTUSBUSBLAMPSTATUSPOWERSOURCEAUTO ADJUST3D REFORMON/STAND BY12LENS SHIFTLEFTRIGHTDOWNUPUSBLAMPSTATUSPOWERSOURCEAUTO ADJUST3D REFORMON/STAND BYSELECT344EEROWPAdjustable Tilt FootTHETRUSTEDSOURCEFORPROJECTORLAMPSANDACCESSORIES
