1286. Installation and Connections321This section describes how to set up your projector and how to connect video and audio sources.Your projector is simple to set up and use. But before you get started, you must first:z Set up a screen and the projector.x Connect your computer or video equipmentto the projector.(→ page 132, 134, 135, 136, 137, 138)c C o n n e c t t h e s u p p l i e d p o w e r c o r d .(→ page 13)NOTE:• Ensure that the power cord and any other cables aredisconnected before moving the projector. Whenmoving the projector or when it is not in use, coverthe lens with the sliding lens cover.• An optional cable cover (NP01CV) is available. Referto page 142 for attaching the cable cover.1 Setting Up the Screen and the ProjectorSelecting a Location[P420X/P350X]The further your projector is from the screen or wall, the larger the image. The minimum size the image can be isapproximately 25" (0.64 m) measured diagonally when the projector is roughly 35 inches (0.9 m) from the wall orscreen. The largest the image can be is 300" (7.6 m) when the projector is about 435 inches (11.0 m) from the wallor screen.300"240"Distance (Unit: m/inch)Lens centerScreen SizeScreen Size (Unit: cm/inch)200"180"150"120"100"80"11.0/435"8.8/348"6.6/260"5.5/216"4.4/173"3.6/144"2.9/115"2.2/86"1.4/57"40"7.3/289"60"30"25"1.1/42"0.9/35"609.6(W)�457.2(H) / 240(W)�180(H)487.7(W)�365.8(H) / 192(W)�144(H)406.4(W)�304.8(H) / 160(W)�120(H)304.8(W)�228.6(H) / 120(W)�90(H)365.8(W)�274.3(H) / 144(W)�108(H)243.8(W)�182.9(H) / 96(W)�72(H)203.2(W)�152.4(H) / 80(W)�60(H)162.6(W)�121.9(H) / 64(W)�48(H)121.9(W)�91.4(H) / 48(W)�36(H)81.3(W)�61.0(H) / 32(W)�24(H)61.0(W)�45.7(H) / 24(W)�18(H)50.8(W)�38.1(H) / 20(W)�15(H)TIP:• The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb.• For more details on throw distance, see page 130.To the wall outlet.
