142. Projecting an Image (Basic Operation)Standby Blinking Power OnSteady orange light Blinking blue light Steady blue light Turning on the Projector1. Slide the lens cover to the left to uncover the lens.2. Press the (POWER) button on the projector cabinetor the POWER ON button on the remote control.The POWER indicator will turn to blue and the projectorwill become ready to use.TIP:• When the message “PROJECTOR IS LOCKED! ENTER YOURPASSWORD.” is displayed, it means that the [SECURITY]feature is turned on. (→ page 30)• When the ECO message is displayed, it means that [ON] isselected for [ECO MESSAGE]. (→ page 94)• Pressing buttons such as power button and MENU button willmake sound. To turn off the beep sound, select [OFF] for [BEEP]from the menu. (→ page 98)After you turn on your projector, ensure that the computeror video source is turned on and that the lens cover isopen.NOTE: When no input signal is present, the no-signal guidance isdisplayed (factory menu setting).(→ page 192)
