1858. User Supportware Controlling the Projector over a LAN (PC Control Utility Pro 4)Using the utility software “PC Control Utility Pro 4”, the projector can be controlled from a computer over a LAN.Control FunctionsPower On/Off, signal selection, picture freeze, picture mute, audio mute, adjusting, error message notification, eventschedule.Screen of PC Control Utility Pro 4This section provides an outline of preparation for use of PC Control Utility Pro 4. For information on how to use PCControl Utility Pro 4, see Help of PC Control Utility Pro 4.TIP:• PC Control Utility Pro 4 can be used with a serial connection.Connect the projector to a LAN.Connect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” (→ page 138), “Con-necting to a Wireless LAN (Optional: NP02LM series)” (→ page 139) and “9 Application Menus” (→ page 105)Start PC Control Utility Pro 4Click “Start” → “All programs” or “Programs” → “NEC Projector User Supportware” → “PC Control Utility Pro 4” →“PC Control Utility Pro 4”.NOTE:• For the Schedule function of the PC Control utility Pro 4 to work, you must have your computer running and not in standby/sleep mode. Select “Power Options” from the “Control Panel” in Windows and disable its standby/sleep mode before running thescheduler.[Example] For Windows 7:Select “Control Panel” → “System and Security” → “Power Options” → “Change when the computer sleeps” → “Put the computerto sleep” → “Never”.NOTE:• When [POWER-SAVING] is selected for [STANDBY MODE] from the menu, the projector cannot be turned on via the network(wired LAN/wireless LAN) connection.TIP:Viewing the Help of PC Control Utility Pro 4• Displaying the Help file of PC Control Utility Pro 4 while it is running.Click “Help (H)” → “Help (H) …” of window of PC Control Utility Pro 4 in this order.The pop-up menu will be displayed.• Displaying the help file using the Start Menu.Click “Start” → “All programs” or “Programs” → “NEC Projector User Supportware” → “PC Control Utility Pro 4” →“PC Control Utility Pro 4 Help”.The Help screen will be displayed.
