6. Using the VIEWER966-2. Projecting the pictures on a USB memory (basic operation)This section explains the basic operations of the [VIEWER]. This is the operating procedure when theoption menu (→ page 103) of the [VIEWER] is in the default state when shipped from the factory.① Start the [VIEWER]1. Turn on the projector.USB2. Insert a USB memory into the USB-A port ofthe projector.NOTE:• To remove a USB memory from the projector, press theMENU button in the file list screen or [DRIVE LIST] screen andselect [REMOVE USB DEVICE]. (→ Page 98 “Remove the USBmemory”)3. Press the INPUT button.The [INPUT] screen is displayed.• Press the SOURCE button when using theremote control.4. Press the INPUT button a few times and movethe cursor to [USB-A].• Every time the INPUT button is pressedbriefly, the cursor moves to the next inputterminal.• Move the cursor to [USB-A] and wait fora while for the [VIEWER] to start and the[DRIVE LIST] screen on the USB memory tobe projected.5. Check that the cursor is moved to [USB 1] andpress the ENTER button.The file list screen will be displayed.
