6. Using the VIEWER1046-6. Changing the logo data (background image)• You can change the screen of the input terminal in a signal-less state (background logo) or thebackground image of the MultiPresenter start-up screen (MultiPresenter logo).• You can also set a password to prohibit third parties from changing the pictures.• You can set pictures that satisfy all of the following conditions.Format JPEG or PNG pictures that can be displayed with the [VIEWER]Resolution Below the panel resolution of the projectorP525UL: WUXGA (1920 × 1200)P525WL: WXGA (1280 × 800)File size 1 megabyte or less1. Display the file list screen.2. Move the cursor to the picture to setin the background logo or the Multi-Presenter logo and press the MENUbutton.The pop-up menu will be displayed.3. Move the cursor to [LOGO] and pressthe ENTER button.The sub-menu will be displayed.① Setting the background logo or MultiPresenter logo1. Move the cursor to [SET TO BACKGROUND LOGO] or [SET TO MultiPresenter LOGO] in thesub-menu and press the ENTER button.• If a [LOGO PASSWORD] has been set, enter the [LOGO PASSWORD] when the [LOGO PASS-WORD] input screen appears.• A screen to confirm whether to change the logo or not is displayed.2. Move the cursor to [YES] and press the ENTER button.② Initializing the background logo or MultiPresenter logo1. Move the cursor to [RESET BACKGROUND LOGO] or [RESET MultiPresenter LOGO] andpress the ENTER button.• If a [LOGO PASSWORD] has been set, enter the [LOGO PASSWORD] when the [LOGO PASS-WORD] input screen appears.• A screen to confirm whether to initialize the logo or not is displayed.2. Move the cursor to [YES] and press the ENTER button.
