180μPD1706214.5 RELATIONSHIP BETWEEN CE RESET AND POWER-ON RESETWhen supply voltage is first turned on, power-on reset and CE reset may be applied simultaneously.Sections 14.5.1 through 14.5.3 describe this reset operation.Section 14.5.4 describes the cautions when supply voltage rises.14.5.1 When V DD Pin and CE Pin Rise SimultaneouslyFig. 14-6 (a) shows the reset operation. Power-on reset starts the program from address 0000H.14.5.2 When CE Pin Raised in Forced Halt State Caused by Power-on Reset.Fig. 14-6 (b) shows the reset operation. Power-on reset starts the program from address 0000H, as in Section14.5.1.14.5.3 When CE Pin Raised after Power-on ResetFig. 14-6 (c) shows the reset operation. Power-on reset starts the program from address 0000H. CE resetrestarts the program from address 0000H at the rising edge of the next timer carry FF set signal.