Using NECCSD Utilities 2-17Supervisor Password IsThis read-only field lets you determine whether aSupervisor Password has been set. This field can be either“Clear” or “Set.” The default is “Clear” (no password hasbeen set).When both the User Password and Supervisor Password areEnabled, only the Supervisor Password gives you fullaccess to all Setup fields.Set User or Supervisor PasswordThe password fields allow you to enable a user-levelpassword or supervisor-level password during POST and toenter Setup.Use the following procedure to set a password.1. Using the arrow keys, select Security from the menu bar.The Security menu appears.2. Select “Set Supervisor Password” or “Set UserPassword” with the plus (+) or minus (-) keys.NOTEOnce the Supervisor Password feature isenabled, the Setup Utility can only be accessed byentering the password.3. With the password field selected, press Enter. Setupdisplays a dialog box with the following prompts:Enter new password: [ ]Confirm new password: [ ]4. Type the password (passwords are not case sensitive)and press Enter. Reenter the password and press Enteragain.
