Using NECCSD Utilities 2-251. Write down the Setup parameters currently set on thesystem.2. Turn off the system.3. Insert the flash diskette into drive A and turn on thesystem.4. When the flash upgrade menu appears, choose “UpdateFlash Memory Area from a file.”5. When the menu asks you to enter a path/filename, usethe arrow keys to select the “.bio” file and press Enter.6. The utility asks for a confirmation that you want to loadthe new flash into memory. Select “Continue withProgramming.”7. After the upgrade completes, remove the upgradediskette.8. Reboot the system and start the Setup program. PressF9 to reset the BIOS defaults. Then, use the copy of theSetup selections you made at the beginning of thisprocedure to set the parameters.LANDESK CLIENT MANAGERLANDesk Client Manager (LDCM) is a software programavailable on the NEC Select Install CD. LDCM uses theDesktop Management Interface (DMI) standard to managecomponents (network interface cards, memory, softwareapplications) within a Client (local) or remote (workstation)PC system. It provides features for managing the resourcesof a local PC and can be used by system administrators tomanage groups of computer systems.See “NEC Select Install CD” for instructions on installingLANDesk Client Manager on the NetPC hard disk.
