2-34 Setup and OperationNECCSD Bulletin Board ServiceLog onto the BBS as follows. If you are going to download a BIOS update utility file, havean unformatted diskette ready to use for the download.NOTE: First time users must answer a new userquestionnaire.1. From the Windows 95 desktop, click the Start button.2. Point to Programs. Point to Accessories and then click Hyper Terminal.3. Double click the Hypertrm icon. The Hyper Terminal program appears.4. Follow the instructions on the screen to set up the modem. Click the HyperTerminal Help button for information about dialing a phone number.5. If communication settings must be selected, check that the settings match thefollowing BBS parameters: Baud rate: select a baud rate that matches your 33.6-Kbps fax/modem Parity: none Data bits: 8 Stop bits: 1 Flow control: Xon/Xoff (select Hardware if using 14.4 Kbps or higher).6. Following the Hyper Terminal instructions, enter the BBS phonenumber (508 635-4706). Your business phone or location might require a 9 1or 1 prefix.7. Press Enter twice.8. Enter your first name, last name, and password. Press Enter after each.9. Follow the screen prompts until the NECTECH Main Menu is displayed.10. At the Main Menu, press J to join a conference. Select Conference 1 for thedesktop conference.11. From the Main Menu, select F and Enter for the File menu.12. At the File menu, select F for a list of downloadable files. Follow the prompts toselect a file for downloading. If downloading a BIOS update utility, downloadthe file onto an unformatted diskette and label it as a BIOS Flash diskette.13. Type D for download and enter the file name when prompted.
