NEC PX-61XM3A Operation Manual

Contents

NEC PX-61XM3A Operation Manual Manual pdf 12 page image

12Basic OperationsPOWERTo turn the unit ON and OFF:1. Plug the power cord into an active AC power outlet.2. Press the Power button (on the unit).The monitor’s POWER/STANDBY indicator turns redand the standby mode is set.3. Press the POWER ON button (on the remote control) toturn on the unit.The monitor’s POWER/STANDBY indicator will lightup (green) when the unit is on.4. Press the POWER STANDBY button (on the remote control)or the Power button (on the unit) to turn off the unit.The monitor’s POWER/STANDBY indicator turns redand the standby mode is set (only when turning off theunit with the remote control).VOLUMETo adjust the sound volume:1. Press and hold the VOLUME button (on the remotecontrol or the unit) to increase to the desired level.2. Press and hold the VOLUME button (on the remotecontrol or the unit) to decrease to the desired level.MUTETo mute the audio:Press the MUTE button on the remote control to cancelthe sound; press again to restore.DISPLAYTo check the settings:1. The screen changes each time the DISPLAY button ispressed.2. If the button is not pressed for approximately three seconds,the menu turns off.DIGITAL ZOOMDigital zoom specifies the picture position and enlargesthe picture.1. (Be sure ZOOM NAV is off.)Press the POINTER button to display the pointer. ( )To change the size of the picture:Press the ZOOM+ button and enlarge the picture.The pointer will change to resemble a magnifying glass.( )A press of the ZOOM- button will reduce the pictureand return it to its original size.To change the picture position:Select the position with the buttons.2. Press the POINTER button to delete the pointer.AUTO ADJUSTTo adjust the size or quality of the pictureautomatically:Press the AUTO ADJUST button.Information AUTO ADJUST ON settingWhen RGB (still picture) input is selected:Fine Picture, Picture ADJ, Position, and Contrast willbe adjusted automatically.When RGB (motion picture), VIDEO, or Y/Pb/Pr(component) input is selected:The screen size switches to ZOOM mode automaticallywith the superimposed caption displayed fully onlywhen the picture contains dark areas above and belowthe picture.OFF TIMERTo set the off timer:The off timer can be set to turn the power off after 30, 60,90 or 120 minutes.1. Press the OFF TIMER button to start the timer at 30minutes.2. Press the OFF TIMER button to the desired time.3. The timer starts when the menu turns off.→ 30 → 60 → 90 → 120 → 0OFF TIMER 30To check the remaining time:1. Once the off timer has been set, press the OFF TIMERbutton once.2. The remaining time is displayed, then turns off after a fewseconds.3. When five minutes remain the remaining time appearsuntil it reaches zero.OFF TIMER 28To cancel the off timer:1. Press the OFF TIMER button twice in a row.2. The off timer is canceled.OFF TIMER 0Note:After the power is turned off with the off timer ...A slight current is still supplied to the monitor. When youare leaving the room or do not plan to use the system for along period of time, turn off the power of the monitor.