NEC PX-61XM3A Operation Manual

Contents

NEC PX-61XM3A Operation Manual Manual pdf 27 page image

27SCREEN WIPERWhen this is set to ON, a white vertical bar movesrepeatedly from the left and of the screen to the right endat a constant speed.Example: Setting “SCREEN WIPER” to “ON”On “SCREEN WIPER” of “LONG LIFE” menu, select“ON”.LONG LIFEEXITPLEORBITERINVERSESCREEN WIPERSOFT FOCUS: AUTO: OFF: OFF: ON: OFFSEL. RETURNADJ.Information SCREEN WIPERON: The white vertical bar appears.You can set the time by pressing the MENU/ENTERbutton while “ON” is set.OFF: Screen wiper mode does not function.Setting the time for SCREEN WIPERSet a time duration and the speed.Example: Setting so that the SCREEN WIPER modestarts in 30 minutes and proceeds for one and a halfhours.On “SCREEN WIPER” of “LONG LIFE” menu, select“ON”, then press the MENU/ENTER button.THE “SCREEN WIPER” screen appears.Adjust the times and speed.SCREEN WIPEREXITWORKING TIMEWAITING TIMESPEED: 01H30M: 00H30M: 3SEL. RETURNADJ.Information Setting the timeWORKING TIME: Set the time duration for “SCREENWIPER”.When the WORKING TIME is set to “ON” the modewill stay on.WAITING TIME: Set the standby time until the“SCREEN WIPER” mode starts.SPEED: Set the moving speed for the “SCREENWIPER”. The speed decreases as the number increases.* The “WAITING TIME” can not be set when the“WORKING TIME” is ON.* THE “WORKING TIME” and “WAITING TIME” canbe set for up to 12 hours and 45 minutes in units of 3minutes. To select “ON” for the “WORKING TIME”...Set the hours of the working time to 0H and the minutesto 0M. “ON” will be displayed.SOFT FOCUSReduces edges and softens the image.Example: Setting “SOFT FOCUS” to “2”On “SOFT FOCUS” of “LONG LIFE” menu, select “2”.LONG LIFEEXITPLEORBITERINVERSESCREEN WIPERSOFT FOCUS: AUTO: OFF: OFF: OFF: 2SEL. RETURNADJ.Information SOFT FOCUS settingsOFF: Turns the SOFT FOCUS function off.1, 2, 3, 4: Activates the SOFT FOCUS setting. Thehigher numbers create a softer image.“SHARPNESS” can not be adjusted in the “PICTURE”menu.Setting the gray level for the sides of thescreenUse this procedure to set the gray level for the parts on thescreen on which nothing is displayed when the screen isset to the 4:3 size.Example: Setting “GRAY LEVEL” to “5”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “GRAY LEVEL” of “OPTION2” menu, select “5”.OPTION2 2 / 4EXITPREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2PICTURE SIZEDVI SETUPCLOSECAPTIONCAPTION CONTNEXT PAGE: OFF: ON: 5: OFF: ON: OFF: LOWSEL. RETURNADJ.Information GRAY LEVEL settingsThis adjusts the brightness of the black (the gray level)for the sides of the screen.The standard is 0 (black). The level can be adjustedfrom 0 to 15. The factory setting is 3 (dark gray).