NEC PX-61XM3A Operation Manual

Contents

NEC PX-61XM3A Operation Manual Manual pdf 30 page image

30• Use the and buttons to select “MULTI MODE”,then use the and buttons to choose from“SINGLE”, “SIDE BY SIDE1~3” and “PICTUREIN PICTURE (BOTTOM LEFT~TOP LEFT)”.• Use the and buttons to select “MAIN”/ “SUB”and “LEFT”/“RIGHT”, then use the and buttonsto choose from “VIDEO1~3”, “HD/DVD1~2” and“RGB1~3”.PROGRAM TIMEREXITDATEMONTUESAT*FRI—SAT*SEL. RETURNADJ.ZOOMON08 : 30- - : - -08 : 3008 : 30- - : - -08 : 3015 : 30OFF10 : 3018 : 1512 : 1510 : 00- - : - -12 : 1516 : 00INPUTMULTI—VIDEO1HD/DVD1—VIDEO1RGB1FUNCTIONINVERSE—WHITE——WHITE—PICTURE IN PICTURE SIDE BY SIDEPROGRAM TIMERMULTI SCREEN SETTINGEXITMULTI MODE: BOTTOM LEFTINPUT MODEMAINSUBSEL. RETURNADJ.: RGB/PC1: VIDEO1MULTI REPEATTwo repeat timers are available.Each timer has MULTI MODE, WORK TIME and INPUTMODE functions.Example:TIMER1 is set to display RGB1 (MAIN) and VIDEO1(SUB) for 4 hours in picute-in-picture mode.TIMER2 is set to display RGB3 (LEFT) and HD/DVD1(RIGHT) for 2.5 hours in side-by-side mode.On “MULTI REPEAT” of “TIMER”, select “ON”, thenpress the MENU/ENTER button.The “MULTI REPEAT TIMER” screen appears.Adjust the items.TIMEREXITPRESENT TIMEPROGRAMMULTI REPEAT: OFF: OFFSEL. RETURNADJ.MULTI REPEAT TIMEREXIT1 MULTI MODEWORK TIMEINPUT MODEMAINSUB2 MULTI MODEWORK TIMEINPUT MODELEFTRIGHT: BTM LFT: 04H00M: RGB/PC1: VIDEO1: S BY S1: 02H30M: RGB/PC3: HD/DVD1SEL. RETURNADJ.Information MULTI REPEAT settingsMULTI MODE: Set the input mode to be displayedwhile the timer is on.WORK TIME: Set the time duration of the display.Time range is from 1 minutes to 4 hours and 15 minutes.INPUT MODE: Set the signal that will be displayedwithin the selected screen.Select “MAIN” or “SUB” for “PICTURE IN PICTURE(BTM LFT~TOP LFT)” and “LEFT” or “RIGHT” for“S BY S1~3”. Only one signal is selected for“SINGLE”.* The two repeat timers run consecutively, i.e., Timer1–Timer2–Timer1–Timer2.* When both PROGRAM TIMER and MULTI REPEATTIMER are set, priority is given to PROGRAM TIMER.PROGRAM TIMERMULTI SCREEN SETTINGEXITMULTI MODE: SIDE BY SIDE1INPUT MODELEFTRIGHTSEL. RETURNADJ.: RGB/PC1: VIDEO1Setting the power on modeThis function sets the input mode at the time the power isswitched on.Example: Setting “VIDEO2”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “PWR. ON MODE” of “OPTION3” menu, select“VIDEO2”.The available inputs depend on the setting of input.OPTION3 3 / 4EXITPREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTID NUMBERVIDEO WALLNEXT PAGE: VIDEO2: OFF: ON: OFF: ALLSEL. RETURNADJ.Information PWR. ON MODE settingsLAST: Last mode (the input that was last selected atthe time the power was switched off).VIDEO1, 2, 3: VIDEO input mode.RGB1, 2, 3: RGB input mode.HD/DVD1, 2: HD/DVD input mode.MULTI: Multi screen mode.Follow the procedure used for PROGRAM TIMER. Seepage 29.Enabling/disabling the front panel controlsThis function enables/disables the front panel controls.Example: Setting “ON”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “CONTROL LOCK” of “OPTION3” menu, select“ON”, then press the MENU/ENTER button.OPTION3 3 / 4EXITPREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTID NUMBERVIDEO WALLNEXT PAGE: LAST: ON: ON: OFF: ALLSEL. RETURNADJ.Information CONTROL LOCK settingsON: Disables the buttons on the front panel.OFF: Enables the buttons on the front panel.* Even when the CONTROL LOCK is set, the POWERswitch will not be locked.* This becomes effective when the on-screen menu goesout.