10External Speaker ConnectionsExternal speakers may be connected to the plasma monitorto reproduce sound from VIDEO, DVD or RGB signalsources.External speakers may be connected directly to the SPEAK-ERS terminals or indirectly by connecting a stereo systemamplifier to the audio outputs.CAUTION: Unplug the plasma monitor and all con-nected components before connecting external speak-ers. Use only speakers with 6-ohm impedance and apower output rating of 7 watts or more.To connect external speakers directly to the plasma monitor:1. Strip the ends of the speaker wires.2. Press down the tabs below the SPEAKERS terminals,insert the speaker wire and release the tab to secure thespeaker wire connection:[a] Connect the right speaker (located at right sideof the monitor when viewed from the front)positive (+) wire to RIGHT +.[b] Connect the right speaker negative (–) wire toRIGHT -.[c] Connect the left speaker negative (–) wire toLEFT–.[d] Connect the left speaker positive wire (+) toLEFT+.SPEAKERS MUSTHAVE MORE THAN7WATT RATINGIMPEDANCE 6 OHMLEFTEXTERNALCONTROLREMOTECONTROLCONTROLLOCKON/ OFFAC INRIGHTRGB 3(Digital RGB)RGB 1R/CR/PRG/YB/CB/PBHDVDL(MONO)RL(MONO)YCB/CRPB/PRRL(MONO)AUDIO 3 AUDIO 2 AUDIO 1 RGB2/ DVD2/ HD2RVIDEO 1VIDEO 2VIDEO 3RIGHTLEFT