NEC PlasmaSync 42MP1 User Manual

Contents

NEC PlasmaSync 42MP1 User Manual Manual pdf 27 page image

20Setting the color temperatureUse this procedure to set color tone produced by the plasmadisplay.Example: Setting "1"Press the PROCEED button on the remote controller todisplay the MAIN MENU on the screen, then...1. Use the ▲ and ▼ buttons to select “PICTURE”, thenpress the “PROCEED” button.The “PICTURE” screen appears.2. Use the ▲ and ▼ buttons to select “COLOR TEMP.”.P I C T U R ECONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODECOLOR TEMP.NRMEMORY2NR-2:::R GSEL. ADJ. RETURNEXIT3. Use the and buttons to select "1".The mode switches as follows when the and buttons are pressed:→ 1 ↔ 2 ↔ 3 ↔ PRO ←* See page 21 to set "PRO".P I C T U R ECONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODECOLOR TEMP.NRMEMORY1NR-2:::R GSEL. ADJ. RETURNEXITInformation Setting the color temperature1 ......................... High (bluer)2 ......................... Middle (Standard)3 ......................... Low (redder) Restoring the factory default settingsSelect “RESET” under the function menu. Note that thisalso restores other settings to the factory defaults.COLOR TEMP. 1:If neither the or button is pressed within 5 seconds,the current selection is set and the previous screen reppears.4. Press the “PROCEED” button.The “COLOR TEMP.” is set to “1”.5. Once the setting is completed...Press the “EXIT” button to return to the main menu.To delete the main menu, press the “EXIT” button oncemore.