15Watching computer images with awide screenSwitch to the wide screen mode to expand the 4 : 3 imageto fill the entire screen.1. Press the "WIDE" button on the remote controller.2. Within 3 seconds ...Press the "WIDE" button again.The screen size switches as follows:→ NORMAL → FULL NORMAL size screen (4:3 or SXGA 5:4)The picture has the same size as the normal computer im-age.FULL size screenThe image is expanded in the horizontal direction.When using a graphic accelerator board that is capable ofdisplaying 848480.FULL size screenInformation Supported resolution• See page 44 for details on the display output of thevarious VESA signal standards supported by themonitor.• When 852 dot480 line wide VGA (*) signals witha vertical frequency of 60 Hz and horizontal frequencyof 31.72 kHz are input, select "WIDE" for the "RGBSELECT" setting. Since selecting an 848480 signalautomatically displays the image in correct size, it isnot necessary to change the RGB SELECT setting.* "IBM PC/AT" and "VGA" are registered trademarksof IBM, Inc. of the United States.
