9Attachable Speaker ConnectionsAttachable speakers (option) may be connected to theplasma monitor to reproduce sound from VIDEO, DVDor RGB signal sources.Attachable speakers may be connected directly to theSPEAKERS terminals or indirectly by connecting a stereosystem amplifier to the audio outputs.CAUTION: Unplug the plasma monitor and allconnected components before connecting externalspeakers. Use only speakers with 6-ohm impedance anda power input rating of 7 watts or more.AC INRGB 3(Digital RGB)SPEAKERS MUSTHAVE MORE THAN7WATT RATINGIMPEDANCE 6 OHMRIGHT LEFTVIDEO 1VIDEO 2REMOTECONTROLRGB 1L ( MONO )L ( MONO )G / Y/ VIDEO 3HDVDRRYL ( MONO )REXTERNALCONTROLCONTROLLOCKON /OFFR / CR / PRB / CB / PBCB / PBCR / PRAUDIO 2 DVD1/HD1AUDIO 3 AUDIO 1RGB2/DVD2/HD2RIGHT LEFTTo connect attachable speakers directly to the plasmamonitor:1. Strip the ends of the speaker wires.2. Press up the tabs below the SPEAKERS terminals,insert the speaker wire and release the tab to secure thespeaker wire connection:[a] Connect the right speaker (located at right sideof the monitor when viewed from the front)positive (+) wire to RIGHT +.[b] Connect the right speaker negative (–) wire toRIGHT –.[c] Connect the left speaker negative (–) wire toLEFT–.[d] Connect the left speaker positive (+) wire toLEFT+.
