233. Adjust using the and buttons.V–POSITION* If neither the or button is pressed within 5 seconds,the current setting is set and the previous screenreappears.To continue making other computer imageadjustments ...Repeat from step 2.4. Once all adjustments are completed ...Press the EXIT button to return to the main menu.To delete the main menu, press the EXIT button oncemore.Information When “AUTO PICTURE” is “OFF”S C R E E NSEL. ADJ. RETURNEXIT: FULL: OFFMODEV–POSITIONH–POSITIONV–HEIGHTH–WIDTHAUTO PICTUREFINE PICTUREPICTURE ADJ.When Auto Picture is off, the Fine Picture and thePicture ADJ. items are displayed so that you can adjustthem.Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture AdjThe position of the image can be adjusted and flickeringof the image can be corrected.Example: Adjusting the vertical position in the normalmodePress the PROCEED button on the remote control todisplay the MAIN MENU on the screen, then...1. Use the and buttons to select “SCREEN”, thenpress the PROCEED button. The “SCREEN” menuappears.Default settings (when RGB/PC is selected)S C R E E NSEL. ADJ. RETURNEXIT: NORMAL: OFFMODEV–POSITIONH–POSITIONV–HEIGHTH–WIDTHAUTO PICTUREFINE PICTUREPICTURE ADJ.* The settings on the SCREEN menu are not preset at thefactory.To select a mode ...Use the and buttons to select a mode.The mode switches as follows when the and buttons are pressed:→ NORMAL ↔ FULL ←* The mode can also be switched by pressing the “WIDE”button on the remote control.2. To adjust the vertical position ...Use the and buttons to select “V-POSITION”.S C R E E NSEL. ADJ. RETURNEXIT: NORMAL: OFFMODEV–POSITIONH–POSITIONV–HEIGHTH–WIDTHAUTO PICTUREFINE PICTUREPICTURE ADJ.
