11POWERTo turn the unit ON and OFF:1. Plug the power cord into an active AC power outlet.2. Press the POWER ON button (on the remote control)to turn on the unit.The monitor’s POWER/STANDBY indicator will lightup (green) when the unit is on.3. Press the POWER OFF button (on the remote controlor the unit) to turn off the unit.The monitor’s POWER/STANDBY indicator turns redand the standby mode is set (only when turning off theunit with the remote control).VOLUMETo adjust the sound volume:1. Press and hold the VOLUME button (on the remotecontrol or the unit) to increase sound output to thedesired level.2. Press and hold the VOLUME button (on the remotecontrol or the unit) to decrease to the desired level.MUTETo cancel the sound:Press the MUTE button on the remote control to cancelthe sound; press again to restore.DISPLAYTo check the settings:1. The screen changes each time the DISPLAY button ispressed.2. If the button is not pressed for approximately threeseconds, the indication will disappear.DIGITAL ZOOMDigital zoom specifies the picture position and enlargesthe picture.1. Press the POINTER button to display the pointer. ( )To change the size of the picture:Press the ZOOM+ button and enlarge the picture.The pointer will change to resemble a magnifyingglass. ( )A press of the ZOOM- button will reduce the pictureand return it to its original size.To change the picture position:Select the position with the buttons.2. Press the POINTER button to delete the pointer.Basic Operations
