NEC PlasmaSync 61XM3 Model Information

Also see for PlasmaSync 50XM4: Supplementary guide Supplementary guide Brochure Brochure Installation guide

NEC PlasmaSync 61XM3 Model Information Manual pdf 22 page image

E-18Picture Settings MenuAdjusting the pictureThe contrast, brightness, sharpness, color and tint can beadjusted as desired.Example: Adjusting the contrastOn “CONTRAST” of “PICTURE” menu, adjust the contrast.PICTURE 1 / 2EXITCONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODENRNEXT PAGE: NORMAL: OFFSEL. RETURNADJ. CONTRAST 52Note: If “CAN NOT ADJUST” appears ...When trying to enter the PICTURE submenu, make surePICTURE MODE is not set to DEFAULT.Information Picture adjustment screenCONTRAST: Changes the picture’s white level.BRIGHTNESS: Changes the picture’s black level.SHARPNESS: Changes the picture’s sharpness.Adjusts picture detail of VIDEO display.COLOR: Changes the color density.TINT: Changes the picture’s tint. Adjust for naturalcolored skin, background, etc. Adjusting the computer imageOnly the contrast and brightness can be adjusted whena computer signal is connected. Restoring the factory default settingsSelect “DEFAULT” under the “PICTURE MODE”settings.Setting the picture mode according to thebrightness of the roomThere are four picture modes that can be used effectivelyaccording to the environment in which you are viewingthe display.Example: Setting the “THEAT. 1” modeOn “PICTURE MODE” of “PICTURE” menu, select“THEAT. 1”.PICTURE 1 / 2EXITCONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODENRNEXT PAGE: NORMAL: OFFSEL. RETURNADJ. PICTURE MODE : THEAT. 1Information Types of picture modesTHEAT. 1, 2: Set this mode when watching video in adark room.This mode provides darker, finer pictures, like thescreen in movie theaters.For a darker image, select THEAT. 2.NORMAL: Set this mode when watching video in abright room.This mode provides dynamic pictures with distinctdifferences between light and dark sections.BRIGHT: This mode provides brighter pictures thanNORMAL.DEFAULT: Use this to reset the picture to the factorydefault settings.Reducing noise in the pictureUse these settings if the picture has noise due to poorreception or when playing video tapes on which the picturequality is poor.Example: Setting “NR-3”On “NR” of “PICTURE” menu, select “NR-3”.PICTURE 1 / 2EXITCONTRASTBRIGHTNESSSHARPNESSCOLORTINTPICTURE MODENRNEXT PAGE: NORMAL: OFFSEL. RETURNADJ. NR : NR-3Information NR* “NR” stands for Noise Reduction.* This function reduces noise in the picture. Types of noise reductionThere are three types of noise reduction. Each has adifferent level of noise reduction.The effect becomes stronger as the number increases(in the order NR-1 → NR-2 → NR-3).OFF: Turns the noise reduction function off.Setting the color temperatureUse this procedure to set color tone produced by the plasmadisplay.Example: Setting “HIGH”On “COLOR TEMP.” of “PICTURE” menu, select “HIGH”.PICTURE 2 / 2EXITPREVIOUS PAGECOLOR TEMP.GAMMALOW TONECOLOR TUNE: HIGH: 2: AUTOSEL. RETURNADJ.Information Setting the color temperatureLOW: RedderMID LOW: Slightly redMID: Standard (slightly bluer)HIGH: Bluer