NEC PlasmaSync 61XM3 Model Information

Also see for PlasmaSync 50XM4: Supplementary guide Supplementary guide Brochure Brochure Installation guide

NEC PlasmaSync 61XM3 Model Information Manual pdf 37 page image

E-33Switching the input source quicklyThis feature enables quick input selection.After setting ON, press the CLEAR/SEAMLESS SWbutton for quick switching between the two selected inputsignals.Example: Set to switch quickly between RGB1 andRGB2.Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “SEAMLESS SW” of “OPTION4” menu, select “ON”.Select “RGB1” and “RGB2”.OPTION4 4 / 4EXITPREVIOUS PAGESUB. P DETECTZOOM NAVPIC FREEZESEAMLESS SWSELECT1SELECT2: AUTO: BTM LFT: S BY S: ON: RGB1: RGB2SEL. RETURNADJ.* The available sources depend on the settings of input.Information SEAMLESS SW Function* This feature will not function for certain inputcombinations. See the table on page E-13.* After switching to the selected input, please operate thisfunction.* This feature will not function during split screen mode.* When SEAMLESS SW is first turned on, or whensignals being transmitted are changed, there may be aslight delay due to signal analysis. SEAMLESS SW settingsOFF: Turns off the SEAMLESS SW function.ON: When the CLEAR/SEAMLESS SW button ispressed, input signals will switch quickly according tothe setting of SELECT1 and SELECT2.RGB/PC1RGB/PC1RGB/PC1RGB/PC1RGB/PC1RGB/PC1Side-by-Side Picture-in-PictureSELECT/FREEZEbuttonAdvanced OSM Settings MenuSetting the menu modeThis allows you to access full menu items.When P. ON DELAY or PLE LINK is ON, this won’t beturned OFF.Example: Setting “ON”On “ADVANCED OSM” of “MAIN MENU”, select “ON”.MAIN MENU 1 / 2EXITPICTUREAUDIOIMAGE ADJUSTOPTION1ADVANCED OSMNEXT PAGE: OFFSEL. EXITADJ.MAIN MENU 1 / 2EXITPICTUREAUDIOIMAGE ADJUSTOPTION1OPTION2OPTION3OPTION4ADVANCED OSMNEXT PAGE: ONSEL. EXITADJ.Information ADVANCED OSM settingsON: All of the main menu items are available foradvanced users.OFF: Some of the main menu items are not available(e.g. OPTION2, OPTION3 and OPTION4).Language Settings MenuSetting the language for the menusThe menu display can be set to one of eight languages.Example: Setting the menu display to “DEUTSCH”On “MAIN MENU”, select “LANGUAGE”, then press theMENU/ENTER button.The “LANGUAGE” screen appears.On “LANGUAGE”, select “ DEUTSCH”, then press theMENU/ENTER button.LANGUAGEMENU/ENTER EXITLANGUAGE: DEUTSCHRETURNOKADJ.The “LANGUAGE” is set to “DEUTSCH” and return to themain menu.Information Language settingsENGLISH ........ EnglishDEUTSCH ....... GermanFRANÇAIS ...... FrenchESPAÑOL ....... SpanishITALIANO ........ ItalianSVENSKA ....... Swedish................... ChineseУ ............ RussianSELECT/FREEZEbuttonS BY S1RGB/PC1RGB/PC1orS BY S2

/ 40

Related manuals for NEC PlasmaSync 50XM4