NEC PlasmaSync 61XM3 Model Information

Also see for PlasmaSync 50XM4: Supplementary guide Supplementary guide Brochure Brochure Installation guide

NEC PlasmaSync 61XM3 Model Information Manual pdf 27 page image

E-23Option2 Settings MenuSetting the power management for computerimagesThis energy-saving (power management) functionautomatically reduces the monitor’s power consumptionif no operation is performed for a certain amount of time.Example: Turning the power management function onSet “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “PWR. MGT.” of “OPTION2” menu, select “ON”.OPTION2 2 / 4EXITPREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2PICTURE SIZEDVI SET UPNEXT PAGE: ON: ON: 3: OFF: ONSEL. RETURNADJ.Information Power management function* The power management function automatically reducesthe monitor’s power consumption if the computer’skeyboard or mouse is not operated for a certain amountof time. This function can be used when using themonitor with a computer.* If the computer’s power is not turned on or if thecomputer and selector tuner are not properly connected,the system is set to the off state.* For instructions on using the computer’s powermanagement function, refer to the computer’s operatinginstructions. Power management settingsON: In this mode the power management function isturned on.OFF: In this mode the power management function isturned off. Power management function and POWER/STANDBY indicatorThe POWER/STANDBY indicator indicates the statusof the power management function. See below forindicator status and description.POWER/STANDBY indicatorSetting the picture to suit the movieThe film image is automatically discriminated andprojected in an image mode suited to the picture.[NTSC, PAL, PAL60, 480I (60Hz), 525I (60Hz), 576I(50Hz), 625I (50Hz), 1035I (60Hz), 1080I (60Hz) only]Example: Setting the “CINEMA MODE” to “OFF”Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “CINEMA MODE” of “OPTION2” menu, select “OFF”.OPTION2 2 / 4EXITPREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2PICTURE SIZEDVI SET UPNEXT PAGE: OFF: OFF: 3: OFF: ONSEL. RETURNADJ.Information CINEMA MODEON: Automatic discrimination of the image andprojection in cinema mode.OFF: Cinema mode does not function.PowermanagementmodeOnOffTurning the pictureback onPicture already on.Operate the keyboard ormouse. The picturereappears.POWER/STANDBYindicatorGreenRedPowermanagementoperating statusNot activated.Activated.DescriptionHorizontal and verticalsynchronizing signalsare present from thecomputer.Horizontal and/orvertical synchronizingsignals are not sentfrom the computer.Reducing burn-in of the screenThe brightness of the screen, the position of the picture,positive/negative mode and screen wiper are adjusted toreduce burn-in of the screen.Set “ADVANCED OSM” to “ON” in the main menu (1/2), then perform the following operations.On “OPTION2” menu, select “LONG LIFE”, then press theMENU/ENTER button.The “LONG LIFE” screen appears.LONG LIFEEXITPLEORBITERINVERSESCREEN WIPERSOFT FOCUS: AUTO: OFF: OFF: OFF: OFFSEL. RETURNADJ.PLE (Peak Luminance Enhancement)Use this to activate the brightness limiter.Example: Setting “PLE” to “LOCK1”On “PLE” of “LONG LIFE” menu, select “LOCK1”.LONG LIFEEXITPLEORBITERINVERSESCREEN WIPERSOFT FOCUS: LOCK1: OFF: OFF: OFF: OFFSEL. RETURNADJ.Information PLE settingsAUTO: The brightness of the screen is adjustedautomatically to suit the picture quality.LOCK1, 2, 3: Sets maximum brightness.The brightness level decreases in the order of LOCK1, 2, 3. LOCK 3 provides minimum brightness.