System Configuration 2-29Software Restore or RemovalSelect the Software tab on the main menu to restore or remove specific applications:! Click on one or more programs to select them. Smart Restore indicates a selected programwith a green check mark in front of it. Deselect a selected program by double clicking it.! Click on the Select All button if you want to select all of the listed programs.! To remove a program, double click it. A red cross in front of the program indicates it hasbeen selected for removal. To deselect the program, click on it again.Hardware SettingsSelect the Hardware tab on the main menu to restore hardware settings:! Click on one or more devices to select them. Smart Restore indicates a selected device witha green check mark in front of it. To deselect the device, click on it again.! Click on the Select All button if you want to select all of the listed devices.Restoration ProcessOnce you have selected the programs or hardware settings you want to restore, click OK to startthe restoration process.Each application or device you selected runs through its installation procedure. Continue as witha normal installation, selecting the options you want. Each time the application asks you if youwish to restart your system, select Yes to ensure all registry information is correct for the nextinstallation.When all the selected programs or devices are installed, remove the Product Recovery CD andstore it in a safe place.PowerMate Driver CDThe PowerMate Driver CD provides drivers for peripheral equipment that is available forpurchase to use with your PowerMate system. The equipment and the drivers are fully tested byNECC to ensure their compatibility with the PowerMate system. If you need drivers forperipheral devices you are adding to your system, use this CD.The PowerMate Driver CD is easy to use. Start the system, and then insert the PowerMateDriver CD. Follow the on-screen prompts to install the required drivers.Intel Processor Serial Number Control UtilityThe Intel Processor Serial Number Control Utility is a Windows program that enables ordisables the reading of the Pentium III processor serial number by software. This function letsyou control which software programs or websites have permission to read the processor serialnumber. When installed, the utility runs automatically each time the system powers on.Note The Intel Processor Serial Number Control Utility is for use with systems shipping withthe Intel Pentium III processor. Installing this utility on a system that does not contain aPentium III processor generates an error message.This utility places an icon in the Windows system tray. The icon provides a visual status of theprocessor serial number. You have the option of hiding the system tray icon. You can enable ordisable the processor serial number at any time. However, enabling the serial number requiresrestarting the system.
