3. Accessing Data for Electric Power, Temperature, and Processor UtilizationExpress5800/R120d-1E, R120d-2E Maintenance Guide166Chapter 3 AppendixThe output above shows the following in a line in order.1st: Sensor name2nd: Sensor number3rd: Sensor statusok indicates that the status has not reached a point of warning or danger.4th: Sensor monitoring point5th: The current reading of the sensorThe sensor indicating intake air temperature contains Amb, Ambient, or Fnt Pnl Temp in its name.The data in the above example is obtained from the sensor that contains Fnt Pnl Temp in its ID and theintake air temperature is 27°C.3.2.3 Processor utilizationThe utilization rate of all logical processors is given by executing the mpstat command provided in a Linuxdistribution.For Red Hat Enterprise Linux 5, sysstat-[version].rpm contains the command.• Execution example# mpstat -P ALL• Execution resultLinux 2.6.18-164.el5 (localhost.localdomain) 11/17/0917:59:30 CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s17:59:30 all 1.23 0.04 0.42 2.69 0.03 0.10 0.00 95.49 1086.4217:59:30 0 0.42 0.00 0.58 0.76 0.00 0.00 0.00 98.24 666.3417:59:30 1 0.41 0.00 0.29 1.09 0.00 0.00 0.00 98.21 0.0017:59:30 2 2.17 0.00 0.33 2.30 0.00 0.00 0.00 95.21 0.0017:59:30 3 1.85 0.08 0.68 8.55 0.00 0.60 0.00 88.24 379.8717:59:30 4 0.87 0.00 0.19 0.42 0.00 0.00 0.00 98.53 0.0017:59:30 5 2.42 0.01 0.35 1.31 0.08 0.00 0.00 95.83 6.6317:59:30 6 0.30 0.01 0.17 1.39 0.00 0.00 0.00 98.13 0.0217:59:30 7 1.36 0.20 0.74 5.72 0.12 0.20 0.00 91.66 33.54You can acquire the processor utilization rate by subtracting %idle from 100%.
