1. Installing Internal Optional DevicesExpress5800/R120d-2E User’s Guide 107Chapter 2 Preparations1.20.2 RemovalRemove a Hard Disk Drive, reverse the installation procedure.If you transfer or dispose of the removed hard disk drive, refer to Chapter 1 (1. Transfer, Movement, andDisposal) in “Maintenance Guide” to erase data.Important NEC assumes no liability for data leakage should the product be transferredto a third party without erasing the data.Note If you have to remove a disk due to a hard disk drive failure, check the slot with itsDISK LED lit in amber.Note Do not pull the handle to remove the hard disk drive.Doing so may damage the handle.Run SETUP utility, and then specify the boot order from the Boot menu. For details about the Boot menu,refer to Chapter 2 (1. System BIOS) in "Maintenance Guide".Tips The saved boot order is cleared when a hard disk drive is removed.DISK LED
