Program 35 : SMDR Account Code Setup35-05 : Account Code SetupLevel:INDescriptionUse Program 35-05 : Account Code Setup to set various Account Code options for an extensionClass of Service. Assign a Class of Service to extensions in Program 20-06.Input DataClass of Service Number 01 ~ 15ItemNo.Item Input Data Description Default01 Account Code Mode 0 = Account Codes Disa-bled1 = Account Codes Op-tional (This is for the ac-count code entry fea-ture.)2 = Account Code Re-quired Not Verified(Forced Account Codesenabled, no verificationwith the system re-quired)3 = Account Code Re-quired and Verified(Forced Account Codesenabled, verification withPRG 35-06-01 required)Use this option to select the Account CodeMode (0 ~ 3).002 Forced Account CodeToll Call Setup0 = Account Codes forALL calls1 = Account Codes forTOLL callsUse this option enable Account Codes forall calls or just toll calls (for mode 2 or 3 inItem 01 above).003 Account Codes for In-coming Calls0 = Disabled (User can-not enter an accountcode.)1 = Enabled (User canenter an account codewhile on an incomingcall.)Use this option to allow users to enter Ac-count Codes for incoming calls. If disabled,any codes entered dial out on the connec-ted trunk.004 Hiding Account Co-des0 = Account Codes dis-played1 = Account Codes notdisplayedUse this option to either hide or show theAccount codes on a telephone display.0ConditionsNoneSL1000/SL1100 ISSUE 3.012-376 Program 35 : SMDR Account Code SetupProgram35
