Program 42 : Hotel Setup42-06 : PMS Service SettingLevel:IN(This Program is available for V2.0 or higher)DescriptionUse PRG 42-06 : PMS Service Setting to set the PMS integration settings when using PMS-U13 andPMS feature.Input DataItemNo.Item Input Data Description Default01 PMS Port Number 0 ~ 65535 Determine the TCP port the applicationshould connect to for the integrationstream.512902 3:00 AM Auto RoomScan0 = Off1 = OnDetermine if the system scans the statusof Hotel rooms at 3:00 AM.003 CheckIn MessageType0 = Off1 = OnDetermines whether a check-in or OutMessage is sent when the action is per-formed on the PBX.004 CheckOut Auto Sta-tus Change0 = Off1 = OnDetermines the room status when a roomis checked out.005 AREYUTHERE/LINET-EST Send Timing1 ~ 128 seconds Defines the time that passes after anyPMS message sent from the PBX that thePBX sends an AREYUTHERE message.1006 AREYUTHERE/LINET-EST Send Count0 ~ 20 (times) This is the retry count for un-acknowl-edged AREYUTHERE messages.When this consecutive count of AREYU-THERE messages is unacknowledged, thePBX assumes the PMS link to be inopera-tional (off-line).307 Check-Out Auto Flexi-ble Status Change0 = Off1 = OnWhen PRG 42-06-07 and PRG 42-06-04are set to on, the status programmed withPRG 42-06-08 can be set upon checkoutregardless of the previous status.008 Status for Check-OutAuto Flexible StatusChange1 = Room Clean(Occu-pied)2 = Maid Required3 = Maid in Room4 = Inspection Required5 = Maintenance Re-quest6 = Out of Order7 = Reserve 18 = Reserve 29 = Reserve 30 = Room Clean(Vacant)* = Reserve 5# = Reserve 6When PRG 42-06-07 is set to on, the sta-tus programmed with PRG 42-06-08 canbe set upon checkout.4SL1000/SL1100 ISSUE 3.012-390 Program 42 : Hotel SetupProgram42
