Make CallDescriptionMake Call lets a Subscriber Mailbox user listen to a voice message and dial MC to return the callwithout knowing their caller's phone number. Make Call automates returning messages since you don'thave to dial the message sender's telephone number. Make Call is always available for messagesreceived from coworkers. Make call is available for messages received from outside callers if thesystem has Caller ID enabled (and provided by the connected telco).While listening to a message, the telephone display shows the callers number (or extension) inaddition to the date and time the message was left.Automatic Route SelectionSince trunk Caller ID data is always received as 10 digits, you must set up Automatic Route Selection(ARS) to properly process the digits dialed during a Make Call callout. For example, it may benecessary to add a leading 1 for all long distance calls or strip the leading 1 and area code from alllocal calls. Refer to Automatic Route Selection in the Programming Manual for more information.Without ARS, all Make Call callouts are dialed exactly as the Caller ID data is received.Related FeaturesCaller ID on page 2-43Make Call for outside calls is available only if the telco provides Caller ID to the telephone system andthe telephone system passes that Caller ID data to the InMail voice mail ports.Message Reply on page 2-188Message Reply cannot automatically reply to a message left by an outside caller. Use Caller ID withReturn Call instead.Programming1. Be sure the telco provides Caller ID to the connected telephone system.ISSUE 3.5 SL1100InMail Feature Manual 2-169M
