NEC SL2100 Quick Install Manual

Also see for UNIVERGE SL2100: User guide Quick install guide User guide Installation manual Programming manual

Contents

NEC SL2100 Quick Install Manual Manual pdf 8 page image

Connecting External Paging to the Interface cardQuick Install Guide – SL2100 MOH and External Audio rev 1.1 84a- IP7WW-082U-B1: Connect the External Paging DeviceThe SL2100 supports External Paging via the Audio Out port of the IP7WW-082U-B1 card.The SL2100 supports up to three External Paging outputs.Each IP7WW-082U-B1 card supports oneaudio output, additional IP7WW-082U-B1cards are required for additional audio outputs.The audio output ports are setup within thesystem configuration.4b- IP7WW-308U-A1: Connect the External Paging DeviceThe SL2100 supports External Paging via the Audio Out port of the IP7WW-308U-A1 card.The SL2100 supports up to three ExternalPaging outputs.Each IP7WW-308U-A1 card supports oneaudio output, additional IP7WW-308U-A1cards are required for additional audiooutputs.The audio output ports are setup within thesystem configuration.Connecting to the RJ45 socket can be done using the adapters, cables or direct termination as shown in thisguide.Audio Out for Paging uses pins 1 & 8 of the RJ45 socket.The external device should conform to this specification.Description SpecificationExternalPaging outputImpedance: 600Ohm @ 1kHzNominal output level: 250mV (-10dBm)Maximum output level: 1V RMS