Configure the SL2100Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1 22Change your PC IP AddressYou will need to reconfigure your PC to have an IP address in the same subnet as the SL2100 during systemcommissioning. You will be able to change the IP address of the SL2100 during this process.Your IP Address is adjusted in Windows Control Panel, select ‘View network status and tasks’Edit the properties of your Ethernet adaptorYou will need to define an IP address in the same network as the SL2100. Recommended values are172.16.0.100 / 255.255.0.0Gateway and DNS addresses are not necessary. Once commissioning of the SL2100 is completed you canreturn to this area and reconfigure your network adaptor to the previous values.
