Configure the SL2100Quick Install Guide – SL2100 with ISDN PRI Trunks rev 1.1 31Make Additional Changes with PCProNote – Only required if the configuration you selected via the Initial Setup Wizard requires fine tuning.Connect and Download the SL2100 configuration, then click Chassis View within theHome TAB.Click on any port (trunk, extension or audio) within the Chassis screen to view the properties within theProperties pane and make changes to the system configuration.When done, click Upload to send the changes to the SL2100 system.Click Disconnect to finish.Note – Not all options are available within the Properties pane when you are offline (not connected to theSL2100), configuration within this guide is done online so you should always:1. Connect to the SL21002. Download the system configuration (always download before you make any changes)3. Then begin your configuration changes (remember to save the PCPro file to your PC)4. Upload your changes and DisconnectClick on each portand configurewithin theProperties pane