D T 7 0 0 M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y SUsing Enhanced Programmable Keys9-202 DT700 Phone User Guide• While your phone is idle and the other workgroup member’s phone has a held call, doone of the following:• To place a hands-free or headset call: Press the key for the workgroupmember, then use your headset or the phone’s speaker to continue the call onyour phone.• To use your phone handset for the call: Pick up your phone handset, thenpress the key for the workgroup member to pick up the call from that address.M U L T I - P R E S S B E H A V I O RT o p l a c e a c a l l t o a m e m b e r o f y o u r w o r k g r o u pYou can use a programmed key to place calls to other workgroup members.• While your phone and the other workgroup member’s phone is idle, do one of thefollowing:To place a hands-free or headset call:1 Press the key for the workgroup member you want to call.An outbound call is made to the workgroup member.2 Use your headset or the phone’s speaker to continue the call on your phone.To use your phone handset for the call:1 Pick up your phone handset.2 Press the key for the workgroup member.An outbound call is made to the workgroup member.3 Continue the call on your phone.Non-idle call states:• If you are on a call, you will see a screen that gives you the option to Blind transferyour currently held call to that workgroup member.Figure 9.31 Transfer soft keyNote: If you actually want to place an attended/consult transfer call rather than aBlind transfer call, press the Transfer key on your phoneset. Once anattended/consult transfer is started, use the Transfer key on the phoneset tocomplete the transfer.
