UNIVERGE SV8100 Issue 7.0System Hardware Manual 4 - 112.6.3.2 Port DefaultsWith the default settings, the ports are assigned as follows:In the initial configuration: All Programmable Function keys are line keys (e.g., key1 is line 1). All trunks are loop start DTMF.2.6.3.3 Setting Up Extension Circuit TypesRun Program 10-03 to set up extension circuit types asrequired. The system will automatically detect and assignmost circuit types when the device is connected.1. Dial 10-03-01.2. Press TRANSFER to Select the slot, port or channel(with ESIU Blades) to be programmed.3. Set the terminal type or option as needed.. If the system has DSS Consoles, Program 30-02 must beused to define DSS extension assignments.As the system recognizes the extension devicesautomatically, when replacing the type of device connected,the type must be undefined in Program 10-03 prior toconnecting the new device. For example, if a port waspreviously used for a telephone and a DSS Console is to beinstalled in that same port, the telephone must first beundefined in Program 10-03 before the console isconnected.Table 4-4 Default Port SettingsStation Ports:Port 1~99 : 200~298Port 100~300 : 299~499Port 301~512 : 500~5211VirtualStation Ports:Port 1~99 : 201~299Port 100~199 : 3601~3700Port 200~256 : 3701~3757Trunk Ports: 1~200
