NEC UNIVERGE SV9300 DT410 User Manual

Contents

NEC UNIVERGE SV9300 DT410 User Manual Manual pdf 42 page image

ONE-TOUCH SPEEDCALLING KEYSThis feature allows a terminal user to dialfrequently-called numbers by pressing a One-touch key assigned for Station Speed Dialing.Up to 32 digits can be registered for each dialnumber.The feature key is set by system data settingat initial installation. For details, pleasecontact the system administrator.TO PROGRAMFollowing explains how to register phone numberto a One-touch Speed Calling key.1. Press Feature key.Feature key lamp lights red. →2. Press One-touch Speed Calling key.Feature key lamp flashes red. →Speaker key lamp lights red. →3. Dial a desired number.81XXXXXXXXXX11:00 AM SUN 1 JUN 2014Recall PICK >>>>4. Press Feature key.Feature key lamp goes off. →Speaker key lamp goes off. →SET11:00 AM SUN 1 JUN 2014MIC DIR HIST. >>>>If you dial a wrong number, you will needto start again from the beginningTo register a pause, press betweenany digits. The pause can not be registeredas a first digit.When a phone number has been alreadyregistered in One-touch key, that number isdisplayed on the LCD. The previous numberwill be cleared when you register a newnumber.TO VERIFYFollowing explains how to confirm the registerednumber in the One-touch Speed Calling key.1. Press Feature key.Feature key lamp lights red. →2. Press a desired One-touch SpeedCalling key.Feature key lamp flashes red. →Speaker key lamp lights red. →00:81XXXXXXXXXX11:00 AM SUN 1 JUN 2014Recall PICK >>>>3. Press Speaker key.Feature key lamp goes off. →Speaker key lamp goes off. →TO MAKE A CALLFollowing explains how to make a call with One-touch Speed Calling key.1. Press One-touch Speed Calling key.Speaker key lamp lights red. →The desired number is automatically dialed.81XXXXXXXXXX11:00 AM SUN 1 JUN 2014Recall PICK >>>>2. When party has answered, lift thehandset.Speaker key lamp goes off. →0:00:05 81XXXXXXXXXX11:00 AM SUN 1 JUN 2014MIC MuteFEATURE OPERATION35