NEC UNIVERGE SV9300 DT410 User Manual

Contents

NEC UNIVERGE SV9300 DT410 User Manual Manual pdf 48 page image

TO ANSWER A CALL WITHHANDSFREE1. The Call Indicator Lamp flashing.Line key lamp flashes red. →2. Press Speaker key.Speaker key lamp lights red. →Line key lamp lights green. →3. Talk toward the mic.20111:00 AM SUN 1 JUN 2014MIC MuteCALL PICKUP - GROUPThis feature permits a terminal user to answer anycalls directed to other extensions in their presetpickup group.This feature is set by system data setting atinitial installation. For details, please contactthe system administrator.This feature is set by Soft key or feature key.The feature key is set by system data settingat initial installation. For details, pleasecontact the system administrator.1. Ringing terminal in your Call Pickup- Group.2. Press Speaker key.Speaker key lamp lights red. →Line key lamp lights green. →20011:00 AM SUN 1 JUN 2014Recall PICK >>>>3. Press Soft key (PICK) or Call Pickup- Group feature key.PICK UP 201 21011:00 AM SUN 1 JUN 2014MIC Mute4. Start conversation with callingparty.FEATURE OPERATION41When you make a call handsfree, pleasenote the following items.• Avoid using in a place where there is alot of echo or noise.• The Microphone is located at the frontof the terminal. It should be no furtheraway than 50 CM.• When talking handsfree be aware of thevolume level as to not disturb peopleclose to you.• Talk alternately with the other party.The voice may be interrupted if bothparties talk at the same time.