UNIVERGE SV8100 Issue 11.0Central Office Calls, Placing 2 - 273Central Office Calls, PlacingDescriptionThe system provides flexibility in the way each extension user can place outgoing trunk calls. This letsyou customize the call placing options to meet site requirements and each individual’s needs. To placea call the user can: Press Line Keys Press a Trunk Group Key Press a Trunk Group Routing (dial 9) Key Dial a code for a specific trunk (#9 + the trunk number) Dial a code for a Trunk Group (704 + group number) Dial a code for Trunk Group Routing or ARS (9) Dial an Alternate Trunk Route Access Code (which you must define) Press or Use a Speed Dial binThere are 200 available trunks.Trunk Port DisableThe system provides a service code (default: 645) which can be used by an extension user to block atrunk for outgoing calls. The user which busied out the trunk still has access to it. All other users areblocked from seizing it to place an outgoing call. The trunk, however, can still be answered by any userprogrammed with the trunk access.Sidetone Volume SetupAllows the system programming for the multiline terminal side tone volume. There are two levels, basedon whether the connected trunk is a digital trunk or analog trunk.Side Tone Auto SetupPer each analog trunk (or all analog trunks) the most suitable Codec Filter setting for Program 81-07 andProgram 81-17 can be automatically adjusted using Programs 90-68-01 and 90-68-02.EnhancementsWith Version 7000 or higher software, the Side Tone Auto Setup feature has been added.
