UNIVERGE SV8100 Issue 11.0Conference, Voice Call/Privacy Release 2 - 345Conference, Voice Call/Privacy ReleaseDescriptionVoice Call Conference lets extension users in the same work area join in a trunk Conference. To initiatea Voice Call Conference, an extension user just presses the Meet-Me Conference key and tells theirco-workers to join the call. The system releases the privacy on the trunk, and other users can just pressthe trunk line key to join the call. Line keys assigned for the trunk blink indicating that privacy has beenreleased, and others can join the current call.Voice Call Conference does not use the telephone system features to announce the call. The personinitiating the Voice Call Conference just announces it verbally. A tone, indicating others have joined theconference, can be provided.The CD-CP00-US provides 64 Conference circuits, to allow two groups of internal or external parties tobe conferenced together up to a limit of 32.Privacy Mode Toggle OptionThe Privacy Mode Toggle option allows an extension user to quickly change an outside call from thenon-private mode to the private mode. If the outside call is on a line key, the user just presses the linekey to switch from non-private mode to private mode. For systems using the Privacy Mode Toggleoption, trunks initially have the privacy released. The remainder of the call is private. If the call is on aCall Appearance (CAP) Key, the user presses their Meet-Me Conference function key instead. Unlikepressing the line key, pressing the Meet-Me Conference key toggles back and forth between private andnon-private mode for the call.Conditions Call Arrival (CAR) Keys and Virtual Extensions do not support Voice Call ConferenceProgrammable Function keys. Voice Call Conference requires a Meet-Me Conference function key and trunk line keys. This feature is not available on single line telephones. With Caller ID enabled, a call with Privacy Release shows the Caller ID until the call isanswered. It can be viewed again by pressing the line key, though this sets the call toPrivate mode. To keep the call on Privacy Release, press the Help + Exit keys.Default SettingDisabled
